How do you plan a commercial bar layout? In this post I’ll review the standard dimensions and interior space requirements for bar and facility layout design.
HOW DO YOU PLAN A COMMERCIAL BAR LAYOUT?
Considering building a bar and not sure if you have enough space? At times it can be challenging at the onset to know if a facility can indeed meet all of one’s design criteria. As an example, here’s a bar layout of a recent project. The new addition to this building, which earmarked 1,000 square feet for the prospective bar, appears large enough to accommodate nearly any bar. However, the Owner also wanted a drink rail with seating on three sides of the room. The space for the prospective bar was beginning to appear marginal, because island bars require a significant amount of aisle space. As I mentioned in an earlier video about bar planning, the first goal is to draw a preliminary cross section of the proposed bar.
STANDARD UNIVERSAL BAR CLEARANCES
My sketch for standard universal bar clearances – shown in Figure 2 and the bar plan below – will enable one to make a preliminary validation of nearly any bar concept. At the core of every bar layout, we need to make space accommodations for all patrons and staff and each respective allotment must include a factor for comfort; these are collectively referred to as human dimensions for interior spaces and can be summarized as follows:
- The back bar requires between 24” – 29”.
- Back bar aisle needs to be from 31” – 37”.
- The underbar equipment requires 24”.
- The bar top should be between 24” – 30” deep and needs to overhang the inside face of the bar die by 11”.
- Customer activity zone for those seated at the bar is 24”.
- Activity zone for servers and ADA needs to be 36”.
- The customer activity zone for patrons seated in front of a drink rail should be 24”.
- Drink rails should be 10” – 12”, but at least 14” for dining.
Looking for a high-value piece of underbar equipment? Are you aware of the growing trend away from soda guns? Many people need a unique piece of bar equipment, and Krowne’s new low-profile bar cooler will solve many evolving problems bar owners are facing! Learn all about coolers, which ones to use and why you …
FIGURE 1. PHOTO OF GLASTENDER ALL-IN-ONE COCKTAIL STATION FIGURE 2. IMAGE OF TAFFER COMMAND STATION BY KROWNE FIGURE 3. PHOTO OF TOBIN ELLIS COCKTAIL STATION BY PERLICK What’s the best cocktail station? Whether you’re planning a new bar or a remodel, you need to know about Krowne’s new Taffer Command Station. That’s Taffer, as …
STUCK ON YOUR BAR DESIGN? CALL US NOW…
SOME FACTS ABOUT BAR TOP DEPTH THAT MIGHT SHOCK YOU
Quite frankly, I’m shocked at all of the inaccurate information I read on the Internet about standard bar dimensions! The craziest story I read recently is that commercial bar tops can range from 20″ – 28″ in depth. Folks, I’ve never designed a commercial bar with a top that’s only 20″ deep! The narrowest bar top depth shouldn’t be less than 24″. If anything, some clients prefer extra overhang (on the customer’s-side of the bar).
BAR LAYOUT: THE CORRECT BAR TOP DEPTH
To calculate the correct bar top depth, simply add the following dimensions (refer to the sketches below):
- Inside overhang (including drink rail) is always 11″ from the inside face of the bar die (bar support wall).
- Add the depth of the bar die. This is typically 5″ for 2″ x 4″ stick-built bar die and 7″ – 8″ for modular bar die.
- Use 6″ – 8″ for exterior overhang.
One can quickly see that the minimum depth is 24″. However, for my bar layouts, 26″ is by far, the most common size. Remember, it doesn’t matter what size drink rail one selects, as the interior overhang is always 11″ for ergonomic reasons. Occasionally, I need to specify 30″, but that’s usually for curved or elliptical-shaped bars.
QUESTION:
Have you heard about Jon Taffer’s invention? READ HERE about Jon’s world-class Zero-Step “Taffer Command Station” by Krowne.
BAR LAYOUT: WHAT’S THE CORRECT BARTENDER AISLE?
Whenever proving a commercial bar layout concept, I always plan to the smallest acceptable backbar aisle clearances. As shown in Figure 2, below, I’m only allotting 31” bartender aisles for this bar, but in spite of that, the clearances all worked – barely!
ALWAYS INCLUDE PROPER AISLES FOR BUILDING EGRESS
Now that the concept for an island bar has been proven, we can commence designing the bar plan. In the grand scheme of all commercial bar layouts:
BAR DESIGN TIP:
Always remember that building codes require that egress must be maintained at all building exits.
Therefore, the final bar layout can’t encroach the egress zone on the open end of this plan. As you’ll notice, we’ve maintained all clearances.
BAR DESIGN TIP:
Island backbars need to be at least 26” deep, as this correlates to the shallowest of pass-thru coolers.
POPULAR DOWNLOADS:
2018_UNIVERSAL_BAR_CLEARANCES_WITH_ADA.pdf
ADA GUIDE FOR SMALL BUSINESSES
BAR_AND_RESTAURANT_SEATING_GUIDELINES.pdf
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Need Help Planning Your restaurant and bar?
RELATED POSTS
CALCULATING MAXIMUM OCCUPANCY FOR BARS
UNCOVER THE SECRET TO THE PERFECT BAR TOP
HOW TO PLAN YOUR BAR AREA FOR PATRON CAPACITY
Curved Bar Design – How to Design a Bar with Equipment
The Secret to Designing a Bar for a Pizza Restaurant
Top 5 Ideas about Bar Countertops
Small Bar Design Ideas and Tips
Most Popular Articles
INTEGRATED BAR DESIGN PROVIDES SINGLE-SOURCE CONSTRUCTION DOCUMENTS
ERGONOMIC EFFICIENT BAR DESIGN INCREASES PROFITS
THE STANDARD BAR LAYOUT DIMENSIONS FOR DIY
HOW MUCH DO DRAFT BEER SYSTEMS COST?
WHAT IT COSTS TO BUILD A COMMERCIAL BAR
BAR EQUIPMENT COST TO BUILD A COMMERCIAL BAR
BAR DESIGN IDEAS – HOW TO DESIGN COMMERCIAL BARS FOR ADA
